DIY Plans-XTool D1 Riser/Lift (Product Specific)

Venmo and CashApp accepted at checkout!

NOW AVAILABLE FOR THE X-TOOL D1 WITH EXTENSION. CHOOSE OPTION ABOVE!

ADD AN ADDITIONAL 1 FOOT+ OF ADJUSTABLE HEIGHT TO YOUR WORK AREA WITHOUT SACRIFICING THE WORKING INTEGRITY OF YOUR LASER!!!!!

These plans were designed to lift the XTool D1 laser engraver. It adds ease of use to your Xtool laser by providing a taller work area for engraving tall objects such as small stools, skateboards, or any other piece that extends taller than a flat surface. Easily move between the normal height of engraving to more than 12 inches within seconds without the hassle of screw on legs. 

No more screwing on feet, using blocks, or stacking on books to get the height you need. Just pull out the dimensional sacrificial board, lower or raise, and ENGRAVE! Simple as that!

This plan does not interfere with the operational capacity of the unit and all buttons, wires, and Wifi antenna, are not affected in any way. 

THE UNIT WORKS AS IT WAS DESIGNED BUT NOW YOU ARE NOT LIMITED TO THE HEIGHT OF YOUR WORK SPACE. 

Note from Designer: 

I am personally using this lift and have had no problems with the operational capacity. It works as described and makes changing heights effortless. The side wire that runs along the unit is unaffected and rides between the unit and wood frame. Form fitting for the laser with ease of removal at any time. NO MODIFICATIONS NEEDED TO THE LASER ITSELF.